Aroma lamps Maintenance instruction

1.Regularly clean cotton swabs and Change cotton swabs, you must add the spring wire with the cotton swabs, because there will no mist come out if without the spring wire.
2.please clean the atomizer plate with medical alcohol regularly.

Steps to use humidifier:

1.Turn on the machine and take out the cotton swab from the machine (Note: There is a spring under the cotton swab, don't lose it.)
2.Soak the entire cotton swab in water and soak for 5-10 minutes. If the water can squeeze out the water, the cotton swab is sufficiently moistened.
3.Put the spring under, then put the cotton swab back into the machine, fill the water, press the button, and the spray will start.

Failure cause of non-spray:

1.Check whether the machine is normal (check whether the machine is powered on and lit)
If the light is on, the machine is normal.
If it does not light, press and hold for 3 seconds to see the light. If it is bright, the problem is solved. If not, try another data cable to see if it is a data cable problem.

2.The machine is normal, still not spraying?
Step 1: Soak cotton swabs (please check the use steps of the humidifier).
Step 2: Check if there is a spring under the cotton swab? If there is no spring under the cotton swab, it will also cause no spray.
PS: How to detect whether there is a spring? Turn the machine upside down, with the spray port facing down, and see if it sprays. If the spray is turned upside down, it is not sprayed, which means that the machine does not have a spring.

3. What kind of water is put in the humidifier?
Humidifier needs to add tap water or mineral water. Do not use pure water or distilled water, otherwise the spray will be reduced or not sprayed.

4. Whether the spray port is pierced
The spray port cannot be poked, and if it is poked, it cannot be sprayed.